一种宽频带RFID阅读器天线的设计
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Design of a wide band RFID reader antenna
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    UHF RFID标签在密集布放环境下,会由于标签天线间的互相影响,使工作频率发生偏移,造成系统漏读。因而本文设计了一款新型的圆极化阅读器天线,该天线工作在UHF频段,具有小型化、高增益、宽频带的特点。其中主辐射圆形贴片通过4个探针与微带匹配网络上下相连,匹配网络的引入提高了天线的圆极化轴比和工作带宽。仿真结果表明,该天线在UHF频段的阻抗带宽和3 dB轴比带宽分别为13%和5%,增益高达9.4 dBi。在空旷的环境下,对密集布放的多个RFID标签进行读取测试。实验表明,运用宽频带的RFID阅读器天线可以有效地提高标签的读取率。

    Abstract:

    When Ultra High Frequency Radio Frequency Identification (UHF RFID) tags in dense cloth environment, the work frequency of stacked RFID tags will be deviated by the mutual influence between the tag antennas, and the system read rate will be declined. This paper designed a new type of circular polarization reader antenna, which works in the UHF frequency band, has the characteristics of miniaturization, high gain, and wide band. In this antenna, the main radiation circular patch is connected up and down by four probes to the matching network, which can effectively improve the circular polarization axial ratio bandwidth and work bandwidth of antenna. The simulation results show the antenna has 13% bandwidth of impedance and 5% bandwidth of 3 dB axial ratio, and 9.4 dBi gain in the UHF frequency. In the open environment, we test the tag read rate of intensive multiple RFID tags. The experimental results show that the wide band RFID reader antenna is available.

    参考文献
    相似文献
    引证文献
引用本文

彭章友,孟春阳,任秀方,李帅.一种宽频带RFID阅读器天线的设计[J].电子测量技术,2015,38(5):19-23

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-05
  • 出版日期:
文章二维码
×
《电子测量技术》
财务封账不开票通知