采用四臂螺旋结构的紧凑圆极化RFID读卡天线
DOI:
CSTR:
作者:
作者单位:

上海大学特种光纤与光接入网省部共建重点实验室 上海 200072

作者简介:

通讯作者:

中图分类号:

TN82

基金项目:


Design of compact circular polarization quadrifilar spiral antenna for RFID
Author:
Affiliation:

Key Laboratory of Specialty Fiber Optics and Optical Access Networks, Shanghai University, Shanghai 200072, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出了一种紧凑新型平面四臂螺旋天线,用于满足超高频(UHF)频段射频识别(RFID)阅读器小型圆极化的设计要求。天线由印制在FR4介质板的4个倒F阵元组成,通过对阵元的折叠及连续相位旋转法布阵,可以有效的减小天线的尺寸;采用改进的微带功分馈电网络及新的耦合匹配方法,提高了圆极化天线的轴比带宽和增益。天线尺寸为56 mm×56 mm×8 mm,在保持相当性能的同时,设计天线与相关参考文献设计天线相比,面积降低12.9%到86.1%。测试结果显示S11<-10 dB覆盖870~950 MHz频段,仿真结果显示带内轴比<2 dB,峰值增益为2.8 dB,波束宽度>120°,交叉极化<-15 dB。

    Abstract:

    To meet the design requirements of the miniaturization and circular polarization of ultra high frequency(UHF) band radio frequency identification(RFID) reader, a novel compact square quadrifilar spiral antenna with righthand circular polarization is presented. The antenna is composed of four invertedF elements printed on the FR4 substrate, and the dimension of the antenna can be effectively reduced by array element bending and the continuous phase rotation method. The improved microstrip powerdivided feeding network and a new coupling match method are used to improve the bandwidth of the axial ratio and gain of the circularly polarized antenna. The proposed antenna has a size of 56 mm×56 mm×8 mm than the reference design reduced by 12.9% to 86%, the 3 dB beamwidth of more than 120°, the peak gain of 2.8 dBic with the axial ratio under 2 dB and the cross polarization of less than -15 dB.

    参考文献
    相似文献
    引证文献
引用本文

戴海斌,王涛,张金艺.采用四臂螺旋结构的紧凑圆极化RFID读卡天线[J].电子测量技术,2017,40(10):86-91

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-12-05
  • 出版日期:
文章二维码
×
《电子测量技术》
财务封账不开票通知