基于I/F启动的PMSM无传感器复合控制方法
DOI:
CSTR:
作者:
作者单位:

江苏大学电气信息工程学院 镇江 212013

作者简介:

通讯作者:

中图分类号:

TM341;TN601

基金项目:


Sensorless composite control method of PMSM based on I/F Starting
Author:
Affiliation:

School of Electrical and Information Engineering, Jiangsu University,Zhenjiang 212013, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对永磁同步电机全速域无位置传感器控制,电机起动时观测器位置估算困难的问题。提出一种电流频率比结合龙伯格观测器的无位置传感器控制策略。首先,在低速域中,采用I/F控制启动;在中高速域,引入龙伯格观测器和锁相环进行位置估计。其次,针对两种控制方法之间直接过渡导致的振荡问题,本文提出了新型平滑过渡策略;对于PI调节器存在协调性与抗干扰能力差的问题,引入自抗扰控制并与新型平滑过渡策略相结合,进一步形成一种复合过渡法;最后经过Simulink和电机实验平台的验证,仿真和实验结果显示,复合控制方法过渡过程平稳并且转速超调和误差明显减小。

    Abstract:

    Aiming at the problem of sensorless control in the full speed domain of permanent magnet synchronous motor, it is difficult to estimate the position of the observer when the motor starts. A sensorless control strategy based on current-frequency ratio combined with Romberg observer is proposed. First, in the low-speed domain, I/F control is used to start; in the medium-high speed domain, Romberg observer and phase lock loop are introduced for position estimation. Secondly, to solve the oscillation problem caused by direct transition between two control methods, a new smooth transition strategy is proposed. For the problem of poor coordination and anti-interference ability of PI regulator, ADRC is introduced and combined with a new smooth transition strategy to form a compound transition method. Finally, through Simulink and motor experiment platform verification, simulation and experiment results show that the transition process of the composite control method is stable and the speed overdrive and error are significantly reduced.

    参考文献
    相似文献
    引证文献
引用本文

赵化勇,田伟,吉敬华.基于I/F启动的PMSM无传感器复合控制方法[J].电子测量技术,2024,47(16):41-48

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-12-10
  • 出版日期:
文章二维码
×
《电子测量技术》
财务封账不开票通知