冷轧带钢屈服强度的脉冲涡流检测方法研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG115.28;TN98

基金项目:

国家科技部“增材制造与激光制造”重大开发专项(2016YFB1100205)、基金委国家重大科研仪器研制项目(61527803)、科技部重大科学仪器设备开发专项子课题(2016YFF0103702)、南京航空航天大学研究生创新基地(实验室)开放基金(kfjj20170325)、中央高校基本科研业务费专项资助


Research on pulse eddy current testing method for yield strength of cold rolled strip steel
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    目前冷轧带钢屈服强度的检测主要依赖于有损检测,大大增加了检测成本。将BP神经网络引入基于脉冲涡流的冷轧带钢屈服强度预测,首先提取脉冲涡流响应信号的时域、频域特征,分析了各个脉冲涡流信号特征的稳定性,然后建立信号特征与材料屈服强度的BP神经网络模型,最后用建立的模型对材料的屈服强度进行预测。实验表明,采用BP神经网络对冷轧带钢进行屈服强度预测的误差为6%及以下,这种方法对于降低工业生产的检测成本、提高检测效率有一定的实用价值。

    Abstract:

    At present, the detection of the yield strength of cold-rolled strip steel mainly depends on the damage detection, which greatly increases the detection cost. In this paper, the BP neural network is introduced into the yield strength prediction of cold rolled strip steel based on pulse eddy current. Firstly, the time domain and frequency domain characteristics of the pulse eddy current response signal are extracted. The stability of the characteristics of each pulse eddy current signal is analyzed, and the BP neural network model for signal characteristics and material yield strength is established, and the yield strength of the material is predicted using the established model. Experiments show that yield strength prediction error is 6% or less using the BP neural network to predict the yield strength of cold-rolled strip steel. This method has certain practical value for reducing the detection cost of industrial production and improving the detection efficiency.

    参考文献
    相似文献
    引证文献
引用本文

李开宇,高雯娟,王平,张艳艳,杭成.冷轧带钢屈服强度的脉冲涡流检测方法研究[J].电子测量技术,2019,42(5):71-75

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2021-07-29
  • 出版日期: