基于FPGA的快速原地转置算法
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Fast inplace matrix transposition algorithm based on FPGA
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    随着合成孔径雷达成像系统对实时性要求的提高,基于FPGA平台的SAR成像系统越来越多。图像矩阵转置作为SAR成像系统的必要处理过程之一,其效率一直制约着SAR成像系统的实时性。本文提出了一种基于FPGA的快速原地转置算法,首先将矩阵分割为大小相等的子矩阵块,利用上位机预先计算出子矩阵块转置前后地址并生成地址序列表,在FPGA上依据地址序列表顺次移动子矩阵块。实验结果表明,相比非原地转置算法,这种原地转置算法使用的辅助空间仅为矩阵空间的0.2%,多耗费2%的时间。这种算法提高了转置效率,降低了转置存储开销,对SAR实时成像系统的有重要意义。

    Abstract:

    With the development of synthetic aperture radar realtime imaging system, more and more SAR imaging systems are based on FPGA. The transposition of image matrix data is one of the essential procedure of SAR imaging system, and its efficiency has been restricted the SAR realtime imaging system. This paper proposes a fast inplace matrix transposition algorithm based on FPGA. Firstly, matrix is segmented into submatrices of the same size. Secondly, an address sequence table which indicates submatrix address in pre and post transposition is calculated by computer in advance. Lastly, according to the address sequence table, submatrices are transposed on FPGA. The result of analysis and simulation shows that this algorithm occupies an extra 2% time span and 0.2% matrix space. This algorithm improves the efficiency of matrix transposition, reduces the burden of storage, which is important to the SAR realtime imaging system.

    参考文献
    相似文献
    引证文献
引用本文

李汉清.基于FPGA的快速原地转置算法[J].电子测量技术,2015,38(11):46-50

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-03-01
  • 出版日期:
文章二维码