谌东,何林,陈树春,温强.一种微弱光电信号调制解调电路设计研究[J].电子测量技术,2016,39(4):119-122
一种微弱光电信号调制解调电路设计研究
Design of modulation/demodulation circuit based on the weak photoelectric signal
  
DOI:
中文关键词:  弱信噪比  自相关检测  光强度调制  强噪声条件  数据采集
英文关键词:weak signal to noise ratio  relevant detection  light intensity modulation  strong noise condition  data acquisition
基金项目:
作者单位
谌东 中国电子科技集团公司第二十九研究所成都610036 
何林 上海航天电子有限公司上海201800 
陈树春 中国电子科技集团公司第二十九研究所成都610036 
温强 哈尔滨工程大学哈尔滨150000 
AuthorInstitution
Chen Dong The 29th Research Institute of CETC,Chengdu 610036,China 
He Lin Shanghai Aerospace Electronics Company Ltd.,Shanghai 201800,China 
Chen Shuchun The 29th Research Institute of CETC,Chengdu 610036,China 
Wen Qiang Harbin Engineering University,Harbin 150000,China 
摘要点击次数: 408
全文下载次数: 463
中文摘要:
      本文针对微弱光电信号或弱信噪比条件下的光电信号检测及数据采集,设计了一种基于自相关检测原理的调制解调电路,旨在用于传感器的光电强度调节及低信噪比信号检测。该电路利用自相关特性较明显的伪随机码与光纤传感器对被检测微弱信号进行调制解调,通过检测输出光强度达到检测微弱信号的目的。同时,对该电路方案进行了强噪声条件下的检测性能仿真研究,仿真结果表明,该电路方案能够有效地实现弱信噪比条件下的光电信号检测及数据采集。
英文摘要:
      In allusion to the photoelectric signal detection or data acquisition under the condition of the weak photoelectric signal or weak signal to noise ratio, the modulation/demodulation circuit based on the autocorrelation detection principle is proposed. It is aimed at the photoelectric intensity adjustment of the modulation sensor and the detection of weak signal.The circuit uses pseudo random code and optical fibre sensor to modulate the weak signal and detects the weak signal according to the output light intensity. Meanwhile, the numerical simulation for the sensing circuit with strong noise is carried out. According to the simulation results, photoelectric signal detection and data acquisition based on the weak signal to noise ratio conditions are realized effectively.
查看全文  查看/发表评论  下载PDF阅读器