电阻误差测量电路设计分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TM13

基金项目:


The design and analysis of resistance error measurement circuit
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对用户关心被测电阻相对于某一基准电阻的数值偏差这一需求,基于伏安法,设计了一款测量误差小、使用方便的电阻误差测量仪。该测量仪采用恒流源作为测试电源,测量值经运算放大器处理,通过模数转换器后以数字表示。本文通过剖析测试仪前端信号处理电路,说明了具体的设计思路、结构原理和元器件选型依据;重点论述了各局部电路对于测量结果造成的附加误差,定量估算了其数值的大小,并列举了就此采取的应对措施。最终根据对测试误差的分析计算,证明本测量仪具有满足使用要求的测量精度。

    Abstract:

    Voltammetry is a common method for measuring resistance, the resistance error sorter is a widely used measuring instrument. In some specific applications, users have special interest on the deviation of the measured resistance relative to a reference resistor. The purposed design is based on such specific application requirements and to develop a resistance error measuring instrument. The measuring instrument uses a constant current power supply, the measured value is processed by the operational amplifier, the analogtodigital converter, and presented in an intuitive digital form. The instrument haslow measurement error and easytouse features. By analyzing the frontend signal processing circuit of the measuring instrument, this article explains the design scheme, structure principle and component selection basis of the instrument. It discusses the additional error of the measurement results caused by the local circuits, with a quantitative estimatation of the size of the error, and provided counter measures in this regard. Eventually, the analysis of the test error calculation proves that the measuring instrument has met the measurement accuracy requirements.

    参考文献
    相似文献
    引证文献
引用本文

刘乃清,张焱.电阻误差测量电路设计分析[J].电子测量技术,2015,38(12):20-25

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-02-29
  • 出版日期: