基于DSP和FPGA的LVDS高速串行通信方案设计
DOI:
作者:
作者单位:

青岛科技大学自动化与电子工程学院青岛266042

作者简介:

通讯作者:

中图分类号:

TP2

基金项目:


Design of LVDS high speed serial communication scheme based on DSP and FPGA
Author:
Affiliation:

College of Automation and Electronic Engineering, Qingdao University of Science and Technology, Qingdao 266042, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    电力电子驱动装置在电力系统中运用比较广泛,而在电力电子驱动装置控制系统设计过程中,因为既要对数据进行高速运算,又要对高频信号进行快速处理,因此,控制器通常都采用DSP和FPGA这样的组合框架。在设计过程中,DSP 和FPGA 的通信问题一直是一个重点研究问题。提出了一种应用SPI 协议的串口通信方案,,利用LVDS线路驱动器/接收器实现DSP( TMFS28335) 中内置的SPI模块和多个FPGA(XC6SLX9) 上配置的SelectIO差分IO模块进行高速串行通信,并通过实验验证了该方案可以正确实现DSP与FPGA之间的串行通信,并具有通信速度高,抗干扰能力强,DSP和FPGA可以分离较远距离等优点。

    Abstract:

    Electric power electronic device is widely used in power system, and in the process of design of power electronic drive device, because it is not only to carry out highspeed operation, but also to carry on the fast processing of high frequency signal. Therefore, the combination of DSP and FPGA is usually used. In the design process, the communication problem of DSP and FPGA has been a focus of research. In this paper, a serial communication scheme is proposed, which is based on SPI (LVDS), FPGA (IO) and SelectIO (XC6SLX9). The DSP module is configured with SPI (TMFS28335). The scheme has the advantages of high speed of communication, strong antiinterference ability, FPGA and DSP can be separated.

    参考文献
    相似文献
    引证文献
引用本文

刘喜梅,陈亚斐,覃庆良.基于DSP和FPGA的LVDS高速串行通信方案设计[J].电子测量技术,2016,39(7):178-182

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-08-17
  • 出版日期: